OFFICIAL HYDROGRAPHIC OBSERVATION REPORT AU
Maryvale River Water Level & Telemetry
Gauge Station: Maryvale River • North East & Tropical Australia• Australia
● NORMAL FLOW
Water Level (STAGE)
0.00 m
Normal Band: 8.8 – 87.5 m
Discharge / Flow
0 m³/s
Historical Peak: 200 m³/s
Elevation
— ft
Elevation above sea level
VERIFIED TELEMETRY
• SOURCE: Bureau of Meteorology (BoM) • GAUGE ID: 120116A • COORD: -19.587°, 145.220°
OBSERVED:
Maryvale River Where It Flows & Gauge Station
HYDROGRAPHIC MAP & GAUGING LOCATION
Start (Source)──➔1 Station Reach──➔End (Mouth)
Water Level & Flow Hydrograph (Maryvale River)
WATER LEVEL & FLOW HYDROGRAPH: RIVER DISCHARGE (m³/s)
CURRENT READING: 0.00 m³/s
Recorded Telemetry Normal Band
Continuous Observations
GEOGRAPHIC COURSE & HYDROLOGICAL REACH
Where It Flows: Maryvale River
The Maryvale River is a vital waterway situated within Australia, flowing predominantly across the North East & Tropical Australia basin. It forms an integral artery of the Maryvale River drainage basin. Continuous hydrological surveillance at the Maryvale River gauging station (coordinates: -19.5868°N, 145.2197°W) allows real-time quantification of upstream runoff, seasonal snowmelt pulses, and meteorological flood crests.
COUNTRY
Australia
REGION / STATE
North East & Tropical Australia
CATCHMENT BASIN
Maryvale River
GAUGING LOCATION
Maryvale River
MONITORING STATIONS & GAUGES ALONG (1)
UPSTREAM & DOWNSTREAM POINTS
| Station / Location | REGION / STATE | Coordinates | Station ID | Action |
|---|---|---|---|---|
| Maryvale River CURRENT GAUGE | North East & Tropical Australia | -19.587°, 145.220° | 120116A | Viewing |
FREQUENTLY ASKED QUESTIONS ABOUT WATER LEVELS
Frequently Asked Questions About Water Levels: Maryvale River
What is the current Maryvale River water level today? ↓
As of the latest continuous telemetry report, the Maryvale River water level at Maryvale River is measured at baseline with an observed discharge of active seasonal rate.
Where is the official monitoring gauge for Maryvale River located? ↓
The primary monitoring station for Maryvale River is located at coordinates -19.5868° Latitude and 145.2197° Longitude in North East & Tropical Australia. Telemetry is recorded under site identifier 120116A.
What are normal water levels and flood stages for Maryvale River? ↓
Typical hydrological levels on the Maryvale River generally fluctuate within 8.8 m and 87.5 m. When stage exceeds these parameters, localized bank overflow and flood advisories may be triggered.
Where does the Maryvale River flow? ↓
The Maryvale River courses through Australia across the North East & Tropical Australia basin, draining into the Maryvale River. It provides critical natural drainage and freshwater replenishment across its catchment reach.
Connected & Nearby Rivers (North East & Tropical Australia)
Hydrologically adjacent waterways and tributaries
Albert_r Berrempa River
Station: Albert_r Berrempa River
Water Level →
Albert_r Bromfleet River
Station: Albert_r Bromfleet River
Water Level →
Albert_r Kerry River
Station: Albert_r Kerry River
Water Level →
Albert_r Lumeah No1 River
Station: Albert_r Lumeah No1 River
Water Level →
Albert_r Mundoolun River
Station: Albert_r Mundoolun River
Water Level →
Albert_r Wolffdene River
Station: Albert_r Wolffdene River
Water Level →