GAUGE STATION AU
Clyde River at Downstream Lake Crescent Water Level & Telemetry
Clyde River • STATION ID: 4202.1 • Tasmania & Wilderness• Australia
● NORMAL FLOW
Water Level (STAGE)
0.00 m
Normal Band: 3.0 – 29.8 m
Discharge / Flow
0 m³/s
Historical Peak: 68 m³/s
Elevation
— ft
Elevation above sea level
VERIFIED TELEMETRY
• SOURCE: Bureau of Meteorology (BoM) • GAUGE ID: 4202.1 • COORD: -42.171°, 147.141°
OBSERVED:
Clyde River at Downstream Lake Crescent Where It Flows & Gauge Station
HYDROGRAPHIC MAP & GAUGING LOCATION
Start (Source)──➔3 Station Reach──➔End (Mouth)
Water Level & Flow Hydrograph (Clyde River at Downstream Lake Crescent)
WATER LEVEL & FLOW HYDROGRAPH: RIVER DISCHARGE (m³/s)
CURRENT READING: 0.00 m³/s
Recorded Telemetry Normal Band
Continuous Observations
GEOGRAPHIC COURSE & HYDROLOGICAL REACH
Where It Flows: Clyde River
The Clyde River is a vital waterway situated within Australia, flowing predominantly across the Tasmania & Wilderness basin. It forms an integral artery of the Clyde River drainage basin. Along its course, it navigates through or proximate to A/b Hamilton, providing municipal drainage, agricultural sustenance, and freshwater habitat. Continuous hydrological surveillance at the Clyde River at Downstream Lake Crescent gauging station (coordinates: -42.1705°N, 147.1405°W) allows real-time quantification of upstream runoff, seasonal snowmelt pulses, and meteorological flood crests.
COUNTRY
Australia
REGION / STATE
Tasmania & Wilderness
CATCHMENT BASIN
Clyde River
GAUGING LOCATION
A/b Hamilton
MONITORING STATIONS & GAUGES ALONG (3)
UPSTREAM & DOWNSTREAM POINTS
| Station / Location | REGION / STATE | Coordinates | Station ID | Action |
|---|---|---|---|---|
| Clyde River at A/b Hamilton | Tasmania & Wilderness | -42.546°, 146.832° | 465.1 | View Level → |
| Clyde River at Bothwell | Tasmania & Wilderness | -42.379°, 147.003° | 54.1 | View Level → |
| Clyde River at Downstream Lake Crescent CURRENT GAUGE | Tasmania & Wilderness | -42.171°, 147.141° | 4202.1 | Viewing |
FREQUENTLY ASKED QUESTIONS ABOUT WATER LEVELS
Frequently Asked Questions About Water Levels: Clyde River
What is the current Clyde River water level today? ↓
As of the latest continuous telemetry report, the Clyde River water level at Clyde River at Downstream Lake Crescent is measured at baseline with an observed discharge of active seasonal rate.
Where is the official monitoring gauge for Clyde River located? ↓
The primary monitoring station for Clyde River is located at coordinates -42.1705° Latitude and 147.1405° Longitude near A/b Hamilton in Tasmania & Wilderness. Telemetry is recorded under site identifier 4202.1.
What are normal water levels and flood stages for Clyde River? ↓
Typical hydrological levels on the Clyde River generally fluctuate within 3.0 m and 29.8 m. When stage exceeds these parameters, localized bank overflow and flood advisories may be triggered.
Where does the Clyde River flow? ↓
The Clyde River courses through Australia across the Tasmania & Wilderness basin, draining into the Clyde River. It provides critical natural drainage and freshwater replenishment across its catchment reach.
Connected & Nearby Rivers (Tasmania & Wilderness)
Hydrologically adjacent waterways and tributaries
Arthur River
Station: Arthur River at Below Rapid River
Water Level →
Dee River Ab Derwent
Station: Dee River Ab Derwent at Upstream Site
Water Level →
Derwent River
Station: Derwent River at Above Nive River
Water Level →
Forth River
Station: Forth River at A/b Lemonthyme
Water Level →
Franklin Rivulet
Station: Franklin Rivulet at Upstream Tidal Limit
Water Level →
Gordon River
Station: Gordon River at A/b Franklin Rv
Water Level →